VOLTAGE : 220V – 240V ~ 50/60Hz
POWER : 100W

MODEL NO.: FF-16
PACKING DIMENSION: L50cm x W31cm x H45.5cm
WEIGHT: 6.75KGS

• Insert extension pipe into the base stand slot. Adjust fan to  your desired height and lock the extension pipe by tightening it with the locking nut.
• Fix the rear grille onto the motor housing cover, taking note on the alignment of the screw grooves on the motor housing cover. Screw in and tighten the rear grille locking screws into the grooves.
• Attach the fan blade onto the motor shaft and lock it with the fan blade locking screw.
• Install the front grille onto the rear grille with the grille ring and fasten it with the grille ring screw and nut.
• Swing Control
   - Turn On / Off the oscillation function by pressing the oscillation switch button.
• Speed Regulation
The number 0, 1, 2, 3 on the Speed Control Switch Indicators.
0 = Stop, 1 = Low Speed, 2 = Medium Speed, 3 = High Speed.
Turn the speed control switch to your desired fan speed.